Nortec RH2+ Manual de usuario descargar pdf (Pagina 41)

Operation| 38

Humidifier Configuration

The RH2 is factory configured to operate under most conditions without the need for any

changes to its configuration. If required, several settings can be made using jumpers on the

RH2’s control board. The output of the RH2 can also be reduced by using a potentiometer on

the RH2’s control board. See Figure 31: RH2 Control Board Jumpers for location of jumpers

and the capacity adjustment potentiometer.

Note: Nortec recommends not making any configuration changes unless they are required and

that any changes to the RH2 settings be performed by a qualified technician.

Figure 31: RH2 Control Board Jumpers

Capacity Adjustment

The capacity adjustment potentiometer can adjust the capacity of the humidifier between 100%

and 30% of its rated output. (Factory setting = 100% output).

Figure 32: Capacity Potentiometer Adjustment

Caution: Never adjust jumpers other than those listed in this section. Other jumpers are

factory set and must not be changed.

100%30%

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

Sin comentarios

Nortec RH2+ Manual de usuario Pagina 41